Multilevel puzzle car parking system
Multilevel puzzle car parking garage modular design, each module
can be designed into two, three, four, five levels, semi-submerged
in various forms, such as the number of parking spaces from a few
to hundreds. this kind of parking garage applies to the ground and
underground car parks, configuration flexibility and cost is low.
Product features:
1) Save land, the configuration flexibility, and shorter
construction period.
2) Low prices, firefighting and exterior decoration, with a total
investment on small foundations.
3) Use automatic control, simple structure, safe and reliable.
4) Acess to a quick, short waiting time.
5) Run a smooth, low noise.
6) Applies to commercial, offces, and residential quarters
supporting the use of car parks.
Main Structure
- Steel structure
- Car Pallet
- Lifting system
- Sliding system
- Transmission system
- PLC control system
- Safety device: anti-dropping device, a photoelectric sensor,
spacing protectors, emergency stop switch.
Work Principle
Puzzle parking system is suitable for the increase of parking
spaces in newly built residential areas and old-fashioned
residential areas. Its operation principle is like rubik's cube,
it's a kind of intelligent equipment that through the lifting and
sliding of the car pallet to achieve stereoscopic storage. The
uppermost car plate is only used for lifting, the ground floor car
plate is only used forsliding movement.
When to store a car, the user drives the car to the front of a
parking system with a vacant space, selects the target parking
space and enters a password or swipes a card. This target parking
space, the parking space under the car pallet moves horizontally so
as to form a down channel for the target parking space. The car
pallet on the target parking space is lowered to the ground by the
lift system and the safety door automatically rises (if
available).The user drives the car by reversing into the car pallet
of the puzzle parking garage. The reason for reversing into storage
is based on the parking safety considerations of international
practice. After parking the vehicle properly, the user leaves the
car pallet to the control panel and swipes the card again. At this
point, the safety door automatically lowers (if available).The
parking system will automatically store the vehicle to the target
parking space, and the whole parking process ends.
When taking the car, the user swipes the card or enters the
password, and the parking space below the target parking space
moves horizontally to form a down channel for the target parking
space. The target parking space is lowered to the ground and the
safety door automatically rises. The user drives the car out of the
stereo garage and swipes the card again, the safety door
automatically lowers, and the whole process of picking up the car
ends.
Technical Parameters
| Item | Parameters |
| Drive Mode | Motor + wire rope or motor + chain |
| Levels of system | 2-8 |
Size of car
(L*W*H) | 5000*1850*1550mm
5000*1850*2050mm |
| Car Weight | 1700-2350kg |
| Operation Mode | Auto IC card/ Manual button |
| Lifting motor power | 4KW |
| Lifting speed | 8-12M/MIN |
| Sliding motor power | 0.2KW |
| Sliding speed | 8M/MIN |
| Control Method | Touch screen / Push button or IC card |
| Parking way | Forward in, Back out |
| Electricity | 3 phases 5 wires, 380V, 50HZ |
| Safety devices | Over-length, over-width, over height detection; car space with car
or without car detection; wrong entrance detection, |
| Malfunction indication | Computer malfunction diagnosis, human-computer communication
information display |
Parts appearance
treatment | Hot spray galvanized treatment and high-grade anti-corrosion
painting |
| Controller | PLC, with control monitoring, IC card, manual and operative panel; |
Way of parking in and
out | Forwarding in and forwarding out; |
