PSH (-1+1) Pit Puzzle Parking System
Characteristics
It saves the land area and takes full use of the underground area.
It can be designed with neighbored multi-sets layout to raise the
parking numbers of cars. The middle and bottom cars may have
advantages of anti-dust, anti-rain, anti-theft. It is safe and
reliable and easy in operation.
Low area coverage and high usage rate of space; The levels and
columns will be added to raise the number of cars according to the
customer's requirements; It may be designed with full-closed style
to adjust the surrounding environment; It operates steadily without
noise and with fast operating speed and short parking and releasing
time; Multi-ways of safety protection and series of safety
protection devices for anti-dropping, anti-crashing and
anti-overloading.
Work Principle
PSH (-1+1) Pit Puzzle Parking System is suitable for the increase
of parking spaces in newly built residential areas and
old-fashioned residential areas. Its operation principle is like
the Rubik's cube, it's a kind of intelligent equipment that through
the lifting and sliding of the car pallet to achieve stereoscopic
storage. The car pallet of pit layer is only used for lifting, and
the car pallet of the ground layer is only used for sliding
movement.
When to store a car, the user drives the car to the front of a
parking system with a vacant space, selects the target parking
space and enters a password or swipes a card. The car pallet of the
target parking space in the pit layer is moved to the ground by a
lifting system. The user drives reversely the car into the car
pallet of the parking garage.
When taking the car, the user swipes the card or enters the
password, and the target parking space below the target parking
space moves horizontally to form a down channel for the target
parking space. The target parking space in the pit layer is moved
to the ground floor by the lifting system. the users drives the car
out of the parking garage, and the whole process of picking up the
car finish.
- Steel structure
- Car Pallet
- Lifting system
- Sliding system
- PLC control system
- Drive system
- Safe-guard system
Technical Parameters
| Item | Parameters |
| Model | PSH(-1+1) |
| Levels of system | 2 |
| Spaces | Based on requirements |
| Size of car (L*W*H) | 5000*1850*1550mm |
| 5000*1850*2050mm |
| Weight of car | 2000kg |
| Motor power | Lift: 5.5~7.5KW |
| Slide: 0.2kw |
| Safeguard devices | anti-fall frame |
| Modes of operation | IC card reading / Manual button with keyboard |
| Controller | PLC |
| Warning devices | Sound, light, electricity |
| Malfunction indication | Fault diagnosis by computer, liquid crystal display |
| Frame composition | Columns and beams are made of H type steel, Channel steel, angle
steel and square pipes; |
| Parts appearance treatment | Galvanized treatment and high-grade anti-corrosion painting |
| Parking way | Forward in, Back out |
| Electricity | 3 phases 5 wires, 380V, 50HZ |
